Keeping the system clean and let the plants grow safely.
Haifa GrowClean™ contains 50 percent polyphosphate while the pH of the product is neutral. Haifa GrowClean™ is sodium-free and ready and easy to use.
The phosphate in traditional fertilizers (such as MKP, MAP and water soluble NPK) is in the form of orthophosphate. This type of phosphate has the characteristic that it easily form a compound with calcium, magnesium and iron. As soon as this com- pound is formed it will participate in the system. It is then no longer available for the plant and can even cause blockages of the dripping system.
At a higher pH and/or a large volume of phosphate the amount of participation will increase. The result of this; less phosphate is available for the plant. An increase of phosphate does not result in improved availability for the plant because this precipita- tion reaction increases unproportionally.
After the introduction of polyphosphate many growers saw that polyphosphate in a low dosage, keeps the system clean form participation and in a higher dosage it gives extra vegetative growth to the plants. Disadvantage of the use of polyphosphates is the high pH of the product which makes it necessary to add acid in the fertilizer tank and sometimes it contains a high level of sodium.
With the introduction of Haifa GrowClean™ this disadvantage is a thing of the past.
Check out the advantages of Haifa GrowClean™
♦ It cleans your dripping system and prevents mineral deposits
How does it work
The unique polyphosphate used in both products remains stable in the solution even at a high pH and a high dosage rate (above 62 mg/ltr P). It does not give any precipitation with other elements. The polyphosphate even ensures that elements - which have precipitated - are re-dissolved. So growers are achieving an improved efficiency of the elements that are provided.
Dose for a clean system
The standard recommendation is a dose rate of 30.9 mg/ltr P from Haifa GrowClean™.
Note: if used from the start of the season – and the system is clean - a dose rate of 15.5 mg/lt P from Haifa GrowClean™ is enough.
| Elements | Haifa GrowClean |
|---|---|
|
NO3 |
5% (5,5%N) |
|
P2O5 |
31% (13,6%P) |
|
K2O |
40% (33,5%K) |
Assuming a 1000 ltr tank 100 times concentrated the following amount is needed:
| Dose | Haifa GrowClean |
|---|---|
|
15.5 mg/ltr P |
11 kg |
|
30.9 mg/ltr P |
22 kg |
|
46.4 mg/ltr P |
33 kg |
|
61.8 mg/ltr P |
44 kg |
* The recommended doses are averages for all crops. Not all crops react in the same way to GrowClean.
Therefore it’s advisable to discuss the exact dose with your adviser or supplier