A comprehensive fertilization recommendation, for spraying the fertilizer either by airplane or by tractor operated sprayer
Product: Haifa bonus crystalline (12-2-44)
Treatment timing: Two treatments are recommended, timed as follows
Physiological stage I. Tillering to Jointing | Spraying by Airplane | |
---|---|---|
Tractor operated sprayer | ||
Physiological stage II Flowering until milk stage of the grains | Spraying by Airplane | |
Tractor operated sprayer | ||
Total rate | 15 Kg/Ha Haifa bonus | |
Spray volume | 100-150 liter/Ha | |
Solution concentration (w/v) | 15 - 10 % (respectively) | |
Adjuvant/surfactant | Recommended (As generally practiced for foliar sprays) | |
Total rate | 15 Kg/Ha Haifa bonus | |
Spray volume | 200-400 liter/Ha | |
Solution concentration (w/v) | 7.5 - 3.75 % (respectively) | |
Adjuvant/surfactant | Recommended (As generally practiced for foliar sprays) | |
Total rate | 10 Kg/Ha Haifa bonus | |
Spray volume | 100-150 liter/Ha | |
Solution concentration (w/v) | 10 - 6.7 % (respectively) | |
Adjuvant/surfactant | Recommended (As generally practiced for foliar sprays) | |
Total rate | 10 Kg/Ha Haifa bonus | |
Spray volume | 200-400 liter/Ha | |
Solution concentration (w/v) | 5 - 2.5 % (respectively) | |
Adjuvant/surfactant | Recommended (As generally practiced for foliar sprays) |
Compatibility. Haifa bonus is highly compatible with a wide range of pesticides and growth regulators, commonly used in field-crops. It is also compatible with other plant nutrients used for correction of deficiencies (Mg, Zn, etc.). Nevertheless, it is advisable to confirm compatibility by mixing a sample of the spray materials at the recommended concentration, before adding to the mix tank.
Safety Measures. Spray should be applied when the plants are fully turgid, and should be avoided during hot and dry weather. Best results are obtained when spraying in the late evening or early morning. It is recommended that this mixture will be sprayed on a small test plot, a few days prior to the comprehensive commercial treatment, so as to assess whether any adverse effects may occur.
Wheat (grain)
Macro elements removed by 1 ton marketable product
N | P | K | Ca | Mg | S |
---|---|---|---|---|---|
-------------------------------------- Kg/ton ------------------------------------------ | |||||
25.0 | 4.0 | 4.5 | 1.0 | 2.5 | 1-4 |
Plant analysis guide
Wheat (High yield) | N | S | P | K | Mg | Ca | Na | B | Zn | Mn | Fe | Cu | Al | Mo |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
------------------------ % ------------------------- | --------------- p.p.m --------------- | |||||||||||||
From | 4.00 | 0.20 | 0.24 | 2.00 | 0.20 | 0.28 | 0.01 | 6 | 22 | 32 | 36 | 6 | 20 | 0.6 |
To | 5.00 | 0.30 | 0.36 | 3.00 | 0.30 | 0.42 | 0.03 | 10 | 34 | 48 | 54 | 10 | 300 | 1.0 |